For a quick and easy canon.com/ijsetup on Mac, go to the Apple menu and choose “System Preferences.” After that, you should choose your printer from the list.
If you are having trouble while using canon printer on your device and you have tried every solution to fix the issue, then the last thing you are left with is to uninstall and re-install the Canon Printer driver. So, in this article, we have clearly discussed how to uninstall the printer on a Mac. This will be followed by a discussion on the re-installation process that can be easily done via canon.com/ijsetup
If you are a newbie and do not know how to configure ij.start.cannon, this article will walk you through the process of configuring the Canon printer wired and wirelessly on a Windows 10 or Mac device. It is needed to instal the latest drivers in order to set up the printer. It is very crucial, however, that you know the model number in order to find the latest IJ canon setup drivers.
Follow the instructions given below to download Canon printer drivers through ij.start.canon on Windows PCs and laptops.you can visit ij.start.canon & see these on-screen step by step directions given below:
To acquire a high-quality print, choose an outstanding HP printer and set it up at 123.hp.com/setup. You can find drivers and software at 123.hp.com/setup. Firstly, launch the favorite browser and go to the HP official website: www.123.hp.com/setup.
Hook up your Canon Printers to a stable Power Source and switch it on.
Now, press the “Power” button of your Printer in order to turn it on. Ensure that its “Power Lamp” is properly lit and stable.
Thereafter, locate the Printer’s Wireless button. This push-button is easy to identify as it is marked with a “Wireless” icon.
Once you locate it, simply Press and Hold it. You will have to wait for the corresponding Indicator Light to blink once. Then, Release it.
After that, this Indicator Light will turn blue.
Next, you must go to the Router and locate its WPS Push-button. Press and Hold it for some time. However, make sure to execute it within two minutes of your last step.
As a result, the Indicator Lamp of your Printer will start blinking. It means that the Printer is searching for a Network available within its range.
Subsequently, the Printer’s “Power Lamp” will begin to blink along with the “Indicator Lamp”.
As such, wait for the Lamps to stop blinking. However, they must remain lit and stable.
With this, the Printer searches and connects to the available Network to finish the “ij.start.canon ts3122” process.
Now, you must ensure that the Printer is hooked to the correct Network. For this, simply run a Test Print.
Load the Printer with plain sheets of A4 size Paper.
Look for the Printer’s “Resume” button. Then, Press and Hold it.
As a result, its “Indicator Lamp” will begin blinking. Wait for it to blink for 15 times.
Make sure to count the same accurately.
Thereafter, Release the button.
With this, you will get the Network Details on a Printed Sheet.
Check the information to ensure it gives the correct SSID Name for completing the “ij.start.canon ts3122” process.
This May Help,
Peter